I’ve had a useful email conversation with a technical person at Lunt. This is a summary of their suggestions which I have yet to try asI’ve not had time nor a clear day! It has a new blue filter in which I replcaed before the April 2024 total solar eclipse.
Now, may I ask with the double stack removed, do you also experience such views? It is certainly true that a double stack can really make your image extra special but if not tuned correctly, can also consistently be at odds with the primary etalon.
What I might recommend here, might seem like a step backwards. When I test double stack units, for the LS50THa or otherwise, I of course start with my scope in single stack mode. I tune and adjust until I am at the best point, and then I introduce the double stack. From there, I make sure my double stack is at rest (that is, no tilt introduced through the tuning wheel) and begin to tune from there. There are times when double stacks need a little something else. If I was testing your LS50THa, with this LS50c, the first thing I might do is go through the entire range on the LS50c that is attached and find my absolute best view while tuning that (after having tuned the primary without the double stack attached). If my field is much like your picture, my next thing I do, is to attempt to retune the primary etalon. At times, a little adjustment on the primary can really go a long way to making the double stack image what I would like it to be. From there, I would lastly try rotation of the double stack unit itself. This may seem the most precarious, but of course you have multiple threads securing it, and you wont need to during any more rotation than the initial 360 degrees, as anything past the first complete turn will put you at the same physical position in terms of lens tilt, but with just less thread to hold the filter onto the telescope.
Very often, customers who are experiencing a lack in quality views with their double stacks will find some relief between these suggestions.
Lastly, I am uncertain how old your telescope may be- but have you checked the BG (Blue glass) optic in your blocking filter as of late? This would be the blue glass element found under the nose tube that is introduced into your focuser. It should be perfectly clear, and without occlusion. Some of our older scopes have an uncoated version of the BG, while the new ones have a coated version. In either case, it should be 100% clear.