Variable stars

› Forums › Photometry › Variable stars

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #643636
    Connor Bradley
    Participant

    Hi, what are some good variable stars to view from the northern hemisphere for photometry?

    #643637
    Mr Ian David Sharp
    Participant

    Hi Conner,

    You might narrow it down by thinking about the types of variable stars you might be interested in. Long-period, Eclipsing Binaries, Cataclysmic etc, etc.

    Also, what equipment you have might dictate the magnitude range you can cope with.

    Cheers
    Ian.

    #643638
    Jeremy Shears
    Participant

    Hello Connor,

    In addition to Ian’s q’s, are you interested in visual photometry or digital? If the latter, there are some targets here to think about if you are starting out: https://britastro.org/vss/VSS_CCD_Target_list%20ed%204_20190723_V3.pdf

    Jeremy

    #643730
    Connor Bradley
    Participant

    Hi, well I use the seestar s50 theres a new photometry mode been added and wanting to try it out, im particular wanting to use it on binaries so I can get involved in watching real time changes.

    #643733
    Jeremy Shears
    Participant

    Hello Connor,

    have a look at the VSS Eclipsing Binary Handbook which is available online.
    Section 4. “Which Eclipsing Binaries to Start With?” lists some EBs you could try.

    This would be a good start to test out your Seestar. Just keep in that the inbuilt photometry programme has some flaws which mean that its results might not be reliable. There is another forum thread running on that subject.

    Jeremy

    #643750
    Mr Ian David Sharp
    Participant

    Hi Connor,

    I too am using my Seestar S50 Pro to do photometry but I’m not using the in-built feature because I want full control in the same way as I would with any telescope/camera setup. Also, as Jeremy says, there are unknowns in the in-built process at the moment.

    I’m currently trying to work out a process that I’m happy with and I’m finding that the ASTAP software is the most useful at the moment. My process at the moment is:

    In the Seestar (SS) app:
    – Make sure you are storing RAW files in the SS app.
    – Add the variable to my custom objects in the Seestar app.
    – Set the exposure in the SS app depending on the brightness of the target to ensure no saturation (I’ve used 10, 20 and 30 seconds so far)
    – Centre the SS on the target and autofocus. Then adjust the focus point up or down about 20 steps to defocus slightly
    – The defocus step is important to prevent saturation and to smear the stars over enough pixels to help when we extract the green channel
    – Now you can add the target to a Plan in the SS app and set it running

    In the morning:
    – Download the FIT files (you can ignore the jpeg files)
    – Load the FIT files into ASTAP – extract the green channel (TG) and optionally average the files into groups (I use 3 or 4 – depending)
    – Perform the photometry in ASTAP choose the comparison stars and and plot the results (I can’t explain all that here!)

    There are videos out there on using ASTAP on Seestar data.

    One important tip – After turning off Autofocus the SS app, make sure you also turn off autofocus on switching target in your plan. If you don’t do this, the SS will autofocus and lose your manual de-focus.

    Lots more to say!

    Cheers
    Ian.

    #643752
    James Weightman
    Participant

    Seestar Photometry:
    I attempted this last night but came up against “Data Download Failed – check your network and retry” I know this is a nerdy computer problem but if anyone out there has a suggestion for a fix I would be grateful.
    My subject for experimentation has been the eclipsing variable W UMi which has the advantage of being near the north celestial pole and is thus in roughly the same part of the sky at any time. I submitted a simple demo movie of this star to the BAA gallery recently.

    #643810
    Jeremy Shears
    Participant

    James, this might be related to the ongoing VizieR/SIMBAD database issues I mentioned on another thread. It’s certainly preventing AAVSO from automatically downloading chart and sequence data.
    Does the ZWO photometry programme state where it gets its data?

    #643811
    Matt Finch
    Participant

    Hi Connor,

    Not necessarily binaries, but some variables which are good to start doing photometry on with the default S50 settings (i.e. 10s exposures) are:
    T CrB
    RY Leo
    TX CVn
    V UMa
    U Boo
    OO Aql
    SW Cyg
    BR Cyg

    These all fall in a useful magnitued range to analyse each of the 10s exposures, and a good starting place I feel as no stacking should be necessary under reasonable conditions. If there is concern around the photometry mode in the S50 these are all easy enough export from the scope and analyse using other software.

    #643820
    Dr Paul Leyland
    Participant

    Hi Connor,

    Not necessarily binaries, but some variables which are good to start doing photometry on with the default S50 settings (i.e. 10s exposures) are:
    T CrB
    RY Leo
    TX CVn
    V UMa
    U Boo
    OO Aql
    SW Cyg
    BR Cyg

    These all fall in a useful magnitued range to analyse each of the 10s exposures, and a good starting place I feel as no stacking should be necessary under reasonable conditions. If there is concern around the photometry mode in the S50 these are all easy enough export from the scope and analyse using other software.

    Please beware that unless you calibrate your detector carefully and apply the transformation coefficients so produced, your magnitude measurements are unlikely to be close to those reported by other observers.

    For time-resolved photometry, such as determining the time of minima of eclipsing variables, this doesn’t much matter. It is the times of the observations which is important, not the magnitude measurements on any particular scale per se.

    Don’t let this discourage you from doing useful work. Especially don’t let it discourage you from learning how to calibrate your telescope and so go on to work on the full range of fields available. The BAA-VSS people are very willing to help you take this step.

    Paul

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.