British Astronomical Association

Supporting amateur astronomers since 1890

Loadstar

› Forums › Spectroscopy › Loadstar

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 6 October 2016 at 6:03 pm #573602
    Mr Nicholas John Atkinson
    Member

    I have bought the Alpy 600 and I am cannot attach the loadstar X2 to the guide port. Am I missing something?

    Many thanks

    Nick

    6 October 2016 at 6:59 pm #577513
    Robin Leadbeater
    Participant

    Hi Nick,

    Doesn’t it just screw onto the male C thread ?  

    (This photo in the manual shows a T threaded camera with a C to T adapter)

    7 October 2016 at 5:44 pm #577514
    Mr Nicholas John Atkinson
    Member

    Hi Robin,

    Of course you are dead right, I had a nose piece screwed into the C thread, I think when it was fitted to the filter wheel the nose piece was attached. I went out to my workshop and removed it and it fits perfectly.

    Thank you for your advice

    Nick

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.